Simple hotspot setup

Simple hotspot setup

            For hotspot setup is actually quite easy as long as there is a guide and was able computer. Any necessary equipment is not ribet and easy to obtain. Skill is needed is to understand and can install a computer network such as lan cable, RG45, switches and internet are connected.

So the equipment needed to set up a radio transmitter hotspots like JAHT Internet, Senao, Minitar, linksys, etc.; lan cable or Belden cable; RG45 or head of the lan cable; pliers krimping; and which should not be left is a fruit pc for testing and tweaking to the radio transmitters of the brain.

Infrastructure that we make to setup hotspots are the most simple, speedy use directly associated with the radio (JAHT, Minitar, or linksys). Then the speedy internet connection is directly emitted by the radio. So, not through the switch again. Means the flow of internet connection is cable telephone -> modem speedy -> lan cable -> radio -> emitted. Do not forget to buy a radio that has a lan cable plug more than one. Because this is used for two things, which is plugged into the modem first and second speedy dicolokan to the computer to the radio settings.

Okay we just started step by step setup hotspots. The assumption is put on the radio experiments JAHT manifold. A radio transmitter that is already widely used and tested by many people, and tend to be stable. Remember, a radio transmitter that we use have to be able to function as a transmitter, not only can function as a receiver. Find JAHT which should have lan cable plugs more than one, to be setting up easily.

wifibaganInfrastruktur hotspot setup according to the picture as well. Computer for the settings and speedy ADSL modem connected to the radio using the cable JAHT Lan.Disini we do not use a switch or hub, so we need bajet not great. Because not use this switch, then the lan cable must be installed in a cross rather than a straight (if still confused, read the article about how to plug straight lan cable and cross).

Once the infrastructure is installed hotspot setup then turn it to then we move to his JAHT setting. Use the computer to enter into JAHT view. Ip setting our computers to the network and can be used to ipnya into JAHT network. Settings on your computer with ip 192.168.2.3, subnet mask: 255.255.255.0, and leave other fields blank. Okay, the computer is we can use to enter into JAHT. Next we open the browser on your computer (to firefox or ie) and type the ip JAHT ie: http://192.168.2.1, it will log out the user interface. We enter 1234 with password Admin.

Here JAHT should we change the type to access point or AP mode. Then change ipnya to communicate with the modem speedy. For example, if speedy modems ip is 192.168.0.1 then change the ip to 192.168.0.3 JAHT. Can be noted that the change is that behind it. Netmasknya Then you had identified with the speedy modem. And last gatewaynya gives a chance to these speedy modem ip is 192.168.0.1. Apply all changes hotspot setup, and was ready to enjoy wifi (like food hehe).

To communicate with the hotspot, do not forget to change the user's computer with the same network with the JAHT. For example, since IP JAHT is 192.168.0.3, then change the user's computer with ip 192.168.0.4 or any other number (remember to change only the numbers behind it). Then Netmasknya equated (255.255.255.0), and gatewaynya is the speedy ip (192.168.0.1).

Hopefully easy explanation of this hotspot setup can be understood. Perhaps this can also be used in the business of our cafe, cafe cafe, or in boarding-kosan students. Kalo one wanted to ask, please leave a comment aja. Thanks